Cart (
Overview
A calibration gas cylinder without the correct regulator is not a functional calibration tool — it is an unusable pressurised cylinder. The regulator is the component that steps the cylinder pressure down from storage pressure to a controlled, usable outlet flow, and in multi-gas calibration and gas supply applications, the ability to regulate multiple gas flows simultaneously or to select precisely between different flow rates is often the operational requirement that a standard single-outlet regulator cannot meet. Incorrect flow rate during a bump test or calibration event — too high, and the calibration gas is wasted and the sensor may be over-exposed; too low, and the sensor does not receive a representative gas concentration — directly affects the accuracy and validity of the calibration result.
Multi-Flow Regulators, supplied by Alright Engineering Solutions, are specialised gas flow control devices designed to provide precise, selectable control over the flow rates of gases from compressed gas cylinders. Available for inlet pressures of 70 bar or 200 bar, with outlet flow ranges from 0–3 L/min up to 0–15 L/min, and in both brass and stainless steel body materials, these regulators are compatible with the standard cylinder valve connections used across the calibration gas, industrial gas, and analytical gas supply sectors.
What sets a multi-flow regulator apart from a basic fixed-flow or single-flow regulator is the ability to control and regulate gas flow across a range of rates from a single device — providing the flexibility to match the output flow to the specific requirement of the instrument or application without changing the regulator or sourcing a different fitting. For calibration gas programmes running multiple detector models with different flow rate specifications, for analytical laboratories managing multiple gas supply lines, or for process applications requiring precise flow control from a single cylinder, a multi-flow regulator is the practical alternative to maintaining a separate regulator for each flow rate requirement.
Key Features
Dual Inlet Pressure Rating — 70 Bar and 200 Bar
Multi-Flow Regulators are available in two inlet pressure ratings: 70 bar for lower-pressure cylinder applications and 200 bar for standard high-pressure compressed gas cylinders. The 200 bar inlet rating covers the majority of industrial and calibration gas cylinders, which are typically filled to 150–200 bar working pressure. The 70 bar variant suits lower-pressure gas supply systems, specialty gas canisters, and applications where cylinder pressure does not exceed 70 bar. Selecting the correct inlet pressure rating is essential — a regulator rated below the cylinder pressure cannot be safely used with that cylinder.
Selectable Outlet Flow Ranges — 0 to 3, 5, 8, and 15 L/min
Four outlet flow range options are available: 0–3 L/min, 0–5 L/min, 0–8 L/min, and 0–15 L/min. The lower flow ranges — 0–3 and 0–5 L/min — suit portable gas detector calibration applications where the instrument’s internal pump draws at 0.5–1.5 L/min and precise low-flow delivery is required to avoid over-supplying calibration gas. The higher flow ranges — 0–8 and 0–15 L/min — are appropriate for fixed gas detection system calibration, purging applications, analytical instrument gas supply, and any application where a higher sustained flow rate is required. Matching the regulator flow range to the application prevents both flow starvation at the instrument inlet and calibration gas waste from excessive flow.
Dual Inlet Connection Options — C10 5/8″ x 18 UNF-M and 1/4″ NPT Female
Inlet connections are available in two configurations: the C10 5/8″ x 18 UNF male thread, which is the standard connection for calibration gas cylinders across the span gas and portable detector calibration sector, and a 1/4″ NPT female connection for high-pressure inlet applications. The C10 5/8″ x 18 UNF connection is the most commonly required for standard calibration gas cylinder supply. The 1/4″ NPT female option suits installations where the gas supply connection uses NPT threaded fittings, which is common in North American process piping and some analytical instrument gas supply systems.
Barbed or Compression Fitting Outlet Connections
Outlet connections are available in barbed fitting or compression fitting configurations. Barbed fittings are used with flexible silicone or PTFE calibration tubing — the standard connection method for portable detector bump testing and calibration where tubing is connected directly from the regulator outlet to the instrument’s calibration inlet or calibration cup adapter. Compression fittings provide a more secure, leak-free connection for permanent or semi-permanent gas supply line installations, analytical instrument connections, and applications where a metal-to-metal seal is required for the gas supply connection.
Brass or Stainless Steel Body — Material Selection for Gas Compatibility
Regulator bodies are available in brass or stainless steel. Brass body regulators are suitable for the majority of non-corrosive calibration gas mixtures — hydrocarbon LEL references, CO, CO2, O2, and standard four-gas span gas mixtures. Stainless steel body regulators are required for corrosive and reactive gas mixtures, including H2S, SO2, Cl2, NH3, HCl, NO, NO2, and other corrosive toxic gas species that would degrade a brass body over time and compromise the accuracy and safety of the gas supply. Specifying the correct body material for the gas type being used is a technical requirement, not just a preference — using a brass regulator with a corrosive gas mixture is a common source of regulator failure in calibration gas programmes.
Integrated Pressure Gauge
The regulator includes an integrated pressure gauge that displays the cylinder contents pressure, allowing the user to monitor cylinder fill level during use and identify when a cylinder is approaching empty before it runs out mid-calibration. For operations running daily bump tests across multiple detectors, knowing the remaining cylinder pressure before the calibration session starts allows the team to plan cylinder replacements without interrupting the calibration programme. An empty cylinder discovered mid-calibration produces an incomplete and invalid calibration record.
1-Year Warranty
Multi-Flow Regulators are supplied with a one-year manufacturer warranty covering defects in materials and workmanship. For calibration equipment that is in daily use across a safety-critical gas detection programme, a warranty period provides documented assurance of manufacturing quality and a clear recourse if a manufacturing defect is identified after purchase.
Technical Specifications
Inlet Pressure: 70 bar or 200 bar
Outlet Flow: 0–3 L/min / 0–5 L/min / 0–8 L/min / 0–15 L/min
Inlet Connection: C10 5/8″ x 18 UNF-M or 1/4″ NPT Female (high pressure)
Outlet Connection: Barbed fitting or Compression fitting
Body Material: Brass or Stainless Steel
Warranty: 1 year
Benefits
Precise flow control protects calibration accuracy and reduces gas waste. A fixed-flow regulator set at a flow rate higher than the instrument requires wastes calibration gas on every bump test — which adds up significantly across a high-frequency daily bump testing programme. A multi-flow regulator set to the correct outlet flow for the specific instrument being calibrated eliminates that waste and ensures the sensor is exposed to the calibration gas at the flow rate the manufacturer’s calibration procedure specifies, which directly affects the accuracy of the calibration result.
One regulator covers multiple flow rate requirements. For operations running different detector models with different calibration flow rate specifications, a multi-flow regulator with a selectable flow range eliminates the need to stock and manage separate fixed-flow regulators for each flow rate. This reduces equipment inventory, simplifies field calibration kits, and ensures the correct flow rate is always available regardless of which detector model is being calibrated.
Correct material selection prevents regulator failure with corrosive gas mixtures. Using a stainless steel body regulator for corrosive toxic gas calibration — H2S, SO2, Cl2, NH3, and others — prevents the internal degradation that occurs when these gases contact brass fittings and seals. Regulator failure with a corrosive gas mixture is both a safety risk and a procurement cost; specifying the correct body material at the time of purchase is the straightforward way to avoid both outcomes.
Integrated pressure gauge prevents mid-calibration gas shortages. Checking the cylinder pressure before each calibration session confirms there is sufficient gas remaining to complete the full bump test or calibration procedure. For teams running multiple detectors in sequence, a depleted cylinder identified before the session starts can be replaced without interrupting the programme or generating incomplete calibration records.
Standard connection options ensure compatibility with existing cylinder and instrument infrastructure. The C10 5/8″ x 18 UNF connection covers the majority of standard calibration gas cylinders. The barbed outlet fitting connects directly to standard silicone or PTFE calibration tubing used with portable detector calibration kits. This means the regulator integrates with existing calibration gas supply infrastructure without requiring additional adapters or fittings in most cases.
Who It’s For
The Safety or HSE Officer Managing a Multi-Detector Calibration Programme
Your operation runs multiple portable gas detectors from different manufacturers, each with a slightly different calibration flow rate specification in the instrument manual. You currently have a collection of fixed-flow regulators — one for each flow rate — and managing which regulator goes with which detector during a calibration session adds unnecessary complexity to a procedure that needs to be fast and reliable before every shift or confined space entry. A multi-flow regulator with a selectable flow range consolidates that into a single regulator that covers the flow requirements of your full detector fleet.
The Instrument Technician or Gas Detection Service Engineer
You service and calibrate gas detection instruments on behalf of multiple clients, across multiple sites, with detectors from different manufacturers requiring different calibration flow rates. Carrying a separate fixed-flow regulator for every flow rate specification is impractical in a field service kit. A multi-flow regulator covers the flow range of the instruments you service in a single compact device, and the choice of barbed or compression outlet fitting means you can connect it to the tubing or fittings already in use at each site.
The Laboratory or Process Engineer Managing Analytical Instrument Gas Supply
Your analytical instruments — gas chromatographs, process analysers, continuous emissions monitors — require precise, stable gas flow from calibration and carrier gas cylinders. Flow rate control is a direct factor in analytical accuracy, and a regulator that allows precise flow adjustment across a defined range gives you the control needed to set each instrument’s gas supply to specification without replacing the regulator when requirements change. The compression fitting outlet option provides the secure, leak-free connection that permanent gas supply line installations require.
Possible Applications
- Portable gas detector bump testing and calibration — Connecting calibration gas cylinders to portable four-gas monitors, single-gas detectors, and multi-sensor instruments for daily bump tests and scheduled calibrations across safety programmes in any industry
- Fixed gas detection system calibration — Supplying calibration gas at the correct flow rate to fixed LEL, toxic gas, and oxygen detection points in industrial facilities, marine engine rooms, and offshore platform process areas
- Corrosive and toxic gas detector calibration — Stainless steel body regulators for H2S, SO2, NH3, Cl2, HCl, and other corrosive toxic gas calibration mixtures used in chemical plant, wastewater, and industrial hygiene monitoring applications
- Gas chromatography carrier gas supply — Precise flow control for chromatography carrier gas (Helium, Hydrogen, Nitrogen) from high-pressure cylinders to analytical instrument inlets in laboratory environments
- Process analyser calibration gas supply — Regulated gas delivery for calibrating continuous emissions monitoring systems, process gas analysers, and on-line measurement instruments in refinery and petrochemical applications
- Marine vessel calibration gas supply — Connecting span gas cylinders to portable detectors and fixed detection systems during vessel maintenance, confined space entry programmes, and safety equipment surveys
- Offshore platform safety equipment maintenance — Regulated calibration gas delivery for detector calibration and functional testing of portable and fixed gas detection equipment during scheduled maintenance on drilling and production platforms
- Industrial gas purging and inerting applications — Higher-flow range variants (0–8 and 0–15 L/min) for controlled inert gas delivery during equipment purging, blanketing, and pressure testing procedures
Trust and Certifications
1-Year Manufacturer Warranty
Multi-Flow Regulators are supplied with a one-year warranty covering manufacturing defects in materials and workmanship. For calibration gas supply equipment used daily in safety-critical gas detection programmes, the warranty period provides documented manufacturing quality assurance and a clear resolution pathway if a defect is identified within the warranty period — which matters for procurement teams that need to account for equipment reliability in their calibration programme planning.
Material Compliance for Gas Service
The choice of brass or stainless steel body material is a technical specification, not just a build quality distinction. Both materials are specified to be compatible with their respective gas service — brass for non-corrosive gas mixtures and stainless steel for corrosive and reactive gas service. Correct material specification is the manufacturer’s assurance that the regulator will perform reliably and safely with the gas type it is rated for, which is the relevant quality standard for calibration gas supply equipment.
Standard Industry Connection Compatibility
Inlet and outlet connections conform to standard industry specifications — C10 5/8″ x 18 UNF for calibration gas cylinder valves and 1/4″ NPT for high-pressure process connections. Standard connection compatibility means the regulator integrates with existing cylinder and instrument infrastructure without requiring non-standard adapters, which simplifies installation and reduces the risk of connection errors during calibration.
Supplied by Alright Engineering Solutions
Multi-Flow Regulators are supplied by Alright Engineering Solutions Pte. Ltd., a Singapore-based distributor of portable and fixed gas detection equipment, certified calibration gas mixtures, and calibration accessories. Alright Engineering Solutions provides local technical support and procurement assistance for calibration gas programmes, gas detection instrument supply, and calibration accessory requirements across Singapore and the regional market.
Accessories and Variants
Calibration Gas Cylinders — Span Gas Mixtures
Multi-Flow Regulators are designed to be used with calibration gas cylinders. Alright Engineering Solutions supplies a range of standard and custom four-gas span gas mixtures — including CO/H2S/CH4/O2 and CO/H2S/iC4H10/O2 combinations — as well as single-gas and specialty gas cylinders for detector calibration and analytical applications.
Silicone and PTFE Calibration Tubing
Flexible calibration tubing connects the regulator’s barbed outlet to the detector’s calibration inlet or calibration cup adapter. Silicone tubing is suitable for non-corrosive gas mixtures; PTFE tubing is required for corrosive toxic gas mixtures to prevent gas-tubing interaction that would affect calibration gas concentration before it reaches the sensor.
Instrument-Specific Calibration Cup Adapters
Calibration cup adapters create a sealed connection between the calibration tubing output and the sensor face of a portable detector, ensuring the calibration gas is directed to the sensor inlet without dilution from ambient air. Available for most major portable gas detector models.
Available Variants
By Inlet Pressure: 70 bar / 200 bar
By Outlet Flow Range: 0–3 L/min / 0–5 L/min / 0–8 L/min / 0–15 L/min
By Inlet Connection: C10 5/8″ x 18 UNF-M / 1/4″ NPT Female
By Outlet Connection: Barbed fitting / Compression fitting
By Body Material: Brass (non-corrosive gas service) / Stainless Steel (corrosive gas service)
Get in Touch
If you need to source a Multi-Flow Regulator for your calibration gas programme, analytical gas supply, or process application, contact Alright Engineering Solutions to discuss your inlet pressure, flow rate, connection, and gas compatibility requirements — and to request a formal quote for the correct regulator variant for your application.
Our team can also assist with compatible calibration gas cylinder supply, tubing, and instrument-specific calibration accessories to complete your calibration gas setup.
📍 3791 Jalan Bukit Merah #06-01, E-Centre @ Redhill, Singapore 159471
