Cart (
Hydrogen gas leaks are invisible, odourless, and ignite at just 4% concentration in air. In environments like battery charging rooms, hydrogen fuel stations, or electrochemical plants, that’s not a theoretical risk — it’s a daily reality. The problem most facilities face isn’t awareness of the danger; it’s having a reliable, always-on personal monitor that workers will actually wear every single shift.
That’s exactly the gap the IGD BELLMINI H2 Portable Single Gas Detector fills.
Developed by International Gas Detectors (IGD) — a UK-based specialist with decades of experience exclusively in gas detection — the BELLMINI H2 is a clip-on personal monitor that detects hydrogen (H2) in the 1–1000 PPM range and alerts the wearer immediately through a triple alarm system. It weighs just 105g, runs for two years without needing a charge, and connects to a smartphone app that gives safety managers genuine oversight — not just a paper record after the fact.
What genuinely separates this from comparable devices is the BELLCONNECT app integration — the most advanced Bluetooth app available for any portable gas detector on the market, giving full calibration, configuration, and data logging control without touching the device.
2. Key Features
Triple Alarm System — Audible, Visual & Vibration A 100dB buzzer, multi-LED visual alerts, and a built-in vibration alarm activate simultaneously when H2 levels breach set thresholds. In a noisy plant environment or when wearing hearing protection, you still get warned. Alarm levels cover Low, High, TWA, and STEL — matching occupational exposure limit monitoring requirements.
2-Year Battery Life — Zero Charging Required Powered by a 3.6V lithium battery that lasts 24 months straight. There’s no charging dock to manage, no dead device at the start of a shift. A periodic confidence beep confirms the unit is live and operational without needing to check a screen.
IP68 Weatherproof & Dustproof Protection IP68 is the highest ingress protection rating available — full dust-tight and submersion-rated. Whether it’s rain, humidity, or dusty industrial conditions, this device keeps monitoring without failure.
BELLCONNECT Bluetooth App (BLE + NFC) Connect wirelessly up to 10 metres via Bluetooth Low Energy or tap via NFC. Through the app, managers can calibrate, bump test, adjust alarm setpoints, assign devices to named workers or locations, and pull up to 200 event logs and 5,000 data records — all from a smartphone.
SAFE Mode Display When no H2 is detected, the LCD screen displays “SAFE” — giving workers a simple, clear visual confirmation before entering a confined space or hazardous area. It’s a small feature that makes pre-entry checks faster and more reliable.
One-Button Operation The entire device is controlled by a single button. No menus to navigate, no multi-step sequences — critical when workers are wearing gloves or operating under time pressure.
Replaceable Sensor & Battery Both components are field-replaceable. When a sensor reaches end-of-life, it can be swapped on-site rather than sending the whole unit back — reducing downtime and long-term cost.
Fast Response Time H2 detection response time is 20 seconds for toxic gas levels — fast enough to trigger an alarm and allow evacuation before exposure becomes critical.
Technical Specifications
Model: BELLMINI
Target Gas: Hydrogen (H2)
Detection Range: 1–1000 PPM
Weight: 105g (with belt clip)
Display: FSTN LCD (1.6 inch)
Battery Life: 24 months (3.6V Lithium, size 2/3 AA)
IP Rating: IP68
Alarm Types: Visual (LED), Audible (100dB@10cm), Vibration — Low, High, TWA, STEL
Wireless: Bluetooth Low Energy (BLE), NFC
Response Time: 20 seconds (Toxic Gas)
Data Logging: Up to 200 alarm events, 5,000 data logs
Humidity Range: 5%–95% RH (non-condensing)
Safety Approvals: ATEX, IECEx, KCs
App: BELLCONNECT (iOS & Android)
3. Benefits
Compliance without the paperwork headache — The BELLCONNECT app auto-generates calibration certificates and bump test records. For HSE audits or regulatory inspections, that documentation is already there — no chasing paper logs.
Workers actually wear it — At 105g with an alligator clip, it’s light enough that workers don’t notice it after the first five minutes. Adoption is the single biggest challenge with personal gas monitors, and the BELLMINI’s form factor solves it practically.
Two years, zero maintenance cycles — For procurement managers overseeing large teams, eliminating a monthly battery check or charging rotation across 50+ devices saves significant operational time and reduces the chance of a device being deployed uncharged.
Named accountability on-site — Assigning each BELLMINI to a specific worker through the app means exposure data is tied to an individual, not a device number. In the event of an incident, you have exact records of who was where and what they were exposed to.
Reduced total cost of ownership — Replaceable sensors mean the device body lasts far longer than single-use or non-serviceable alternatives. For facilities managing gas detection at scale, that’s a meaningful budget difference over a 5-year cycle.
4. Who It’s For
The HSE Manager overseeing a hydrogen fuel facility You’re responsible for 30+ workers across a site where H2 is produced, stored, and handled daily. You need devices that are always operational, easy to audit, and provide real data — not just alarm logs. The BELLMINI’s app-based oversight and auto-generated compliance reports give you exactly that, without adding to your administrative workload.
The Field Technician working in battery rooms or electrolysis plants You’re in and out of enclosed spaces throughout your shift. You need something that clips on, stays on, and doesn’t need attention — just alerts you if something goes wrong. The BELLMINI’s 2-year battery and single-button simplicity means it’s ready every shift without any setup from you.
The Procurement Officer sourcing personal gas monitors for a large team You’re comparing total cost, reliability, and compliance capability across multiple vendors. The BELLMINI’s replaceable sensor design, 2-year warranty, ATEX certification, and centralised app management make it a straightforward justification — both for budget approval and for your safety team.
5. Possible Applications
- Hydrogen fuel stations — Personal monitoring during refuelling operations and maintenance tasks
- Battery manufacturing & charging rooms — H2 off-gassing from lead-acid batteries during charging is a significant ignition risk
- Electrolysis and electrochemical plants — H2 is a direct byproduct; worker personal protection is a regulatory requirement
- Semiconductor fabrication — H2 used in deposition and annealing processes in enclosed cleanroom environments
- Oil refineries — Hydrodesulphurisation and hydrocracking units use H2 under pressure
- Laboratories handling hydrogen gas — Research environments where H2 cylinders are stored or used
- Confined space entry — Pre-entry atmosphere testing and continuous monitoring during work
- Aerospace maintenance facilities — H2-powered test equipment and ground support operations
6. Trust & Certifications
ATEX: Ex II 1G Ex ia IIC T4 Ga ATEX is the European standard for equipment used in explosive atmospheres. This classification means the BELLMINI is certified safe for use in Zone 0 — the most hazardous classification, where explosive gas is present continuously. If your site requires ATEX-rated equipment, this covers it.
IECEx: Ex ia IIC T4 Ga The international equivalent of ATEX, accepted across 50+ countries outside the EU including Australia, Middle East, and Asia-Pacific. If your operations are global, IECEx certification removes the need for country-by-country approvals in most cases.
KCs Certified Korean Certification for industrial safety — required for deployment in South Korean industrial facilities and accepted in several other Asian markets.
2-Year Manufacturer Warranty Covered by IGD’s standard warranty (sensor warranty subject to individual sensor data). For a device deployed in demanding environments, knowing you have manufacturer support for 24 months matters.
IGD — International Gas Detectors UK-based, Stockport. IGD has operated exclusively in the gas detection industry for decades, supplying both fixed and portable detection solutions to industrial clients globally. This isn’t a general instrumentation brand that added gas detection to its catalogue — it’s their entire focus.
7. Accessories & Variants
BELLCONNECT App (Free — iOS & Android) The core management tool for calibration, configuration, data logging, and compliance reporting. Essential for any site deploying multiple units.
Alligator/Belt Clip (Included) Allows secure attachment to clothing, PPE, or equipment. Keeps the sensor positioned correctly for accurate breathing zone monitoring.
Replacement Sensor Modules Available per gas type. Field-swappable, extending device lifespan and avoiding full unit replacement costs.
Calibration Gas Kits Available separately for on-site bump testing and full calibration. Supported directly through the BELLCONNECT app workflow.
Available BELLMINI Variants:
POR-GDIS-H2 — Hydrogen (H2) | 1–1000 PPM
POR-GDIS-CO — Carbon Monoxide (CO) | 1–1000 PPM
POR-GDIS-H2S — Hydrogen Sulfide (H2S) | 0.1–100 PPM
POR-GDIS-O2 — Oxygen (O2) | 0.1–30% VOL
POR-GDIS-NH3 — Ammonia (NH3) | 1–100 PPM
POR-GDIS-HCN — Hydrogen Cyanide (HCN) | 1–50 PPM
POR-GDIS-SO2 — Sulfur Dioxide (SO2) | 0.1–20 PPM
POR-GDIS-COEX — Carbon Monoxide EX | 1–2000 PPM
If hydrogen gas monitoring is part of your site’s safety requirements — whether you’re equipping a single technician or a team of 100 — the BELLMINI H2 is worth a proper evaluation against what you’re currently using.
Get in touch with our team to request a formal quote, arrange a product demonstration, or discuss fleet pricing for larger deployments.
