Cart (
Overview
Hydrogen cyanide is one of the most acutely toxic gases a worker can encounter — and unlike many industrial hazards, it gives very little warning before exposure reaches dangerous levels. In environments where HCN can build up quickly, whether that’s a metal finishing line, a fumigation bay, or a chemical processing plant, the margin between a safe reading and a life-threatening situation can be measured in seconds. Workers and safety teams need a personal monitor that doesn’t just detect HCN, but does so reliably and fast, every single shift, without adding operational friction.
The BELL MINI HCN Single Gas Detector (part number POR-GDIS-HCN) is IGD’s answer to that challenge. Manufactured by International Gas Detectors — a UK-based specialist with decades of experience in fixed and portable gas detection — the BELL MINI is purpose-built for personal, continuous protection in high-risk environments. Its detection range of 1–50 ppm covers the full practical span of occupational HCN exposure monitoring, with a 20-second typical response time fast enough to matter when it counts.
What genuinely sets the BELL MINI apart from competing personal gas monitors in this category is its two-year battery life on a single lithium cell, paired with the BELLCONNECT Bluetooth app — widely regarded as the most capable data management platform available on any portable HCN gas detector. You’re not just getting a clip-on alarm; you’re getting a managed safety instrument with real-time IoT connectivity, full calibration records, and audit-ready event logging, all in a device that weighs 105 grams.
Key Features
High-Performance HCN Sensor (1–50 ppm Detection Range)
The BELL MINI HCN uses an electrochemical sensor with advanced signal processing to deliver accurate, stable readings across its full 1–50 ppm range. The NIOSH recommended exposure limit for HCN is 4.7 ppm (ceiling), and the IDLH is 50 ppm — so this detector is calibrated precisely for real occupational risk thresholds. In practice, this means the alarm triggers at the right moment: not early enough to cause alarm fatigue, and not late enough to fail the worker.
Triple-Mode Alarm System (Audible, Visual, Vibrating)
When a hazardous HCN reading is detected, the BELL MINI responds with a 100 dB audible buzzer, flashing LED indicators, and a physical vibrating alarm — all simultaneously. This matters most in noisy industrial environments like manufacturing floors or confined spaces, where a buzzer alone might be missed. The vibration alarm ensures that even workers wearing hearing protection receive an immediate, unambiguous warning. Alarms are configurable across Low, High, TWA (Time-Weighted Average), and STEL (Short-Term Exposure Limit) thresholds.
Two-Year Battery Life (No Charging Required)
Powered by a 3.6V lithium 2/3 AA battery, the BELL MINI runs for up to two years without replacement or recharging. For HSE managers overseeing large fleets of personal monitors, this eliminates one of the most common compliance gaps in portable gas detection: devices that aren’t charged and therefore aren’t worn. A confidence beep sounds periodically to confirm the unit is live and operational — no guesswork needed.
IP68 Weatherproof and Dustproof Construction
The housing meets IP68, meaning it is fully dustproof and protected against continuous immersion in water. For field teams working in outdoor plant environments, loading docks, or humid processing areas, this level of protection is non-negotiable. The robust enclosure keeps the sensor and electronics intact in conditions that would compromise lesser devices.
BELLCONNECT App — Full Device Management via Bluetooth
Via Bluetooth Low Energy (BLE) and NFC, the BELL MINI connects to the BELLCONNECT app — an IGD-exclusive platform that provides calibration management, bump test records, live gas readings, alarm level adjustment, and data download. Safety managers can assign individual units to named personnel or specific site zones, creating a clear chain of accountability. Calibration certificates are generated automatically within the app, making compliance documentation straightforward.
200-Event Log and 5,000-Point Data Log
The device stores up to 200 alarm event logs and 5,000 individual data log entries onboard. The data logging interval is configurable through the BELLCONNECT app, giving safety teams the granularity they need for incident investigation or exposure trend analysis. This level of on-device logging is exceptional for a single-gas personal monitor and directly supports regulatory reporting requirements.
One-Button Operation and Field-Replaceable Sensor
Despite its technical sophistication, the BELL MINI is designed for practical usability. A single button handles all primary operations, reducing the chance of operator error in the field. The sensor module is field-replaceable — when a sensor reaches end of life, a technician can swap it out without sending the entire unit back for service, reducing downtime and total cost of ownership.
SAFE Mode Visual Confirmation
When activated through the BELLCONNECT app, SAFE Mode displays a prominent on-screen indicator confirming that no hazardous HCN concentration has been detected. For workers entering confined spaces or areas cleared for entry, this provides immediate visible reassurance rather than relying on the absence of an alarm as confirmation of safety.
Technical Specifications
Model: BELLMINI
Target Gas: Hydrogen Cyanide (HCN)
Detection Range: 1–50 PPM
Weight: 105g (with belt clip)
Display: FSTN LCD (1.6 inch)
Battery Life: 24 months (3.6V Lithium, size 2/3 AA)
IP Rating: IP68
Alarm Types: Visual (LED), Audible (100dB@10cm), Vibration — Low, High, TWA, STEL
Wireless: Bluetooth Low Energy (BLE), NFC
Response Time: 20 seconds
Data Logging: Up to 200 alarm events, 5,000 data logs
Humidity Range: 5%–95% RH (non-condensing)
Safety Approvals: ATEX, IECEx, KCs
App: BELLCONNECT (iOS & Android)
Benefits
For the individual worker, wearing the BELL MINI HCN means having a device they can actually trust to be running when they clip it on in the morning. There’s no overnight charging routine to forget, no battery-dead surprises at the start of a shift. The triple-mode alarm cuts through industrial noise to deliver a warning that can’t reasonably be ignored — even in a noisy, busy environment. The compact size and alligator clip mean it sits on a lapel or collar without interfering with PPE or physical work.
For HSE officers and safety managers, the real value is in the data trail. Every alarm event, every bump test, and every calibration is timestamped and stored — either on the device or automatically synced to the BELLCONNECT cloud. When a regulator or auditor asks for exposure records, that documentation exists, is accurate, and took no manual effort to produce. The ability to name individual units to specific workers or zones means accountability is built into the system, not added as an afterthought.
For procurement teams, the cost argument is clear. A two-year battery life reduces consumable costs substantially compared to rechargeable units. Field-replaceable sensors mean the device body has a longer service life. And the robust IP68 build means fewer units lost to damage in demanding environments. Over a three-to-five year fleet lifecycle, the total cost of ownership difference compared to budget single gas clip detectors is meaningful.
Who It’s For
Chemical Plant HSE Officer
You’re responsible for monitoring HCN exposure across a production facility where the gas is used or generated as a byproduct. You need to know that every person entering a risk zone is carrying a calibrated, functioning detector — and that if something goes wrong, you have an accurate record of what happened. The BELL MINI’s BELLCONNECT integration means you can check calibration status across your device fleet from your phone, and the event logging gives you the incident data you need for RIDDOR reporting or insurance purposes.
Confined Space Entry Supervisor
Before any worker enters a confined space where HCN may be present, you need a positive indication of atmospheric safety — not just the absence of an alarm. The BELL MINI’s SAFE Mode provides exactly that. You can hand a unit to a team member, confirm the display shows SAFE, and have documented evidence that the atmosphere was monitored at entry. When the work is done, the data log shows continuous readings throughout the task.
Fumigation and Pest Control Field Technician
You work in environments where HCN-based fumigants may be in use, often in enclosed agricultural or shipping container settings. You need a personal monitor that’s small enough not to get in the way, tough enough to handle outdoor conditions, and reliable enough that you trust it with your life — not just your compliance checklist. The BELL MINI’s IP68 rating, compact form factor, and 20-second response time make it practical protection, not just procedural box-ticking.
Possible Applications
Metal Finishing and Electroplating Facilities — HCN is produced during cyanide-based plating processes and acid pickling of metals. Workers in these areas face consistent daily exposure risk and require continuous personal monitoring throughout their shift.
Fumigation Operations — Agricultural stores, shipping containers, and grain silos are treated with HCN-generating fumigants. Field operatives carrying the BELL MINI HCN have real-time personal protection during treatment and ventilation periods.
Petrochemical and Refinery Sites — HCN can be generated as a combustion byproduct in certain refinery processes. Maintenance workers and contractors entering these areas need an ATEX-certified gas monitor that meets the site’s intrinsic safety requirements.
Water Treatment Plants — Chlorination and certain chemical dosing processes can result in incidental HCN generation. Operators conducting regular plant checks benefit from a lightweight personal monitor they can wear without disrupting their workflow.
Emergency Response Teams — Fire investigation and HAZMAT response teams need portable HCN detection capability when dealing with structural fires, vehicle fires, or chemical incidents, where HCN is a common combustion product.
Pharmaceutical Manufacturing — Certain synthesis processes in pharmaceutical production involve nitrile or cyanide compounds. Lab and production workers require continuous air quality monitoring that’s unobtrusive and compatible with clean-room or production floor environments.
Mining and Tunnelling — Blasting operations and diesel exhaust in enclosed mine or tunnel environments can elevate HCN concentrations. Personal monitors worn by underground workers provide the first line of detection before fixed systems can flag an issue.
Trust & Certifications
ATEX: Ex II 1G Ex ia IIC T4 Ga
ATEX certification is the European standard for equipment used in potentially explosive atmospheres. The BELL MINI’s classification means it is safe for use in Zone 0 environments — the most hazardous category, where an explosive atmosphere is present continuously or for long periods. This is a hard requirement on most industrial sites in the EU and UK, and a non-negotiable for procurement on petrochemical, refinery, or mining sites.
IECEx: Ex ia IIC T4 Ga
The IECEx scheme is the international equivalent of ATEX, recognised across Australia, the Middle East, Asia-Pacific, and other global markets. If your operations span multiple countries, IECEx certification means the BELL MINI meets safety standards wherever you deploy it.
KCs Certification
KCs (Korean Certification) approval ensures the device meets South Korean industrial safety standards, relevant for organisations operating in or supplying to Korean industrial markets.
Two-Year Instrument Warranty
IGD backs the BELL MINI with a two-year warranty on the instrument itself, with sensor warranty terms specific to each sensor variant. This commitment is a practical indicator of build quality confidence.
International Gas Detectors (IGD) — Brand Credibility
IGD has been designing and manufacturing gas detection equipment from its Stockport, UK facility for decades, supplying fixed and portable detection solutions to customers across petrochemicals, utilities, defence, and industrial manufacturing globally. The BELL MINI is an IGD-exclusive product — not a rebadged generic unit — developed and supported by an in-house engineering team. That matters when you need technical support, calibration guidance, or a rapid response to a product question in the field.
Accessories & Variants
BELLCONNECT App (iOS / Android)
The companion app is free and transforms the BELL MINI from a standalone alarm into a fully managed safety instrument. It handles calibration, data download, configuration, and reporting — essential for any operation that takes compliance documentation seriously.
Alligator Belt Clip
Included with the unit. Allows secure attachment to clothing, harnesses, or lapels, positioning the sensor face outward at breathing zone level for the most accurate exposure readings.
Calibration Gas (HCN)
Appropriate calibration gas cylinders for bump testing and full calibration are available from IGD and certified gas suppliers. Regular bump testing is recommended as best practice and is easily managed through the BELLCONNECT app’s built-in reminder system.
Available BELL MINI Variants
POR-GDIS-HCN — HCN (Hydrogen Cyanide) | 1–50 ppm
POR-GDIS-CO — CO (Carbon Monoxide) | 1–1,000 ppm
POR-GDIS-H2S — H₂S (Hydrogen Sulphide) | 0.1–100 ppm
POR-GDIS-COEX — CO Extended Range | 1–2,000 ppm
POR-GDIS-CO-H — CO H₂ Compensated | 1–500 ppm
POR-GDIS-O2 — O₂ (Oxygen) | 0.1–30% Vol
POR-GDIS-O2LF — O₂ Lead-Free Sensor | 0.1–30% Vol
POR-GDIS-H2 — H₂ (Hydrogen) | 1–1,000 ppm
POR-GDIS-NH3 — NH₃ (Ammonia) | 1–100 ppm
POR-GDIS-SO2 — SO₂ (Sulphur Dioxide) | 0.1–20 ppm
Every BELL MINI variant runs on the same platform and BELLCONNECT app, making fleet management consistent across different gas hazard zones on the same site.
Request a Quote or Product Consultation
If you’re evaluating personal HCN monitors for a site rollout, a confined space programme, or a compliance upgrade, the BELL MINI HCN warrants a closer look — particularly if battery management, data logging, and ATEX compliance are on your checklist.
Contact our safety equipment team to request a product consultation, discuss volume pricing for fleet procurement, or arrange a demonstration of the BELLCONNECT app in your operational environment. We can also assist with site-specific configuration recommendations and calibration gas sourcing.
