Cart (
Overview
Carbon dioxide is one of the most frequently underestimated atmospheric hazards in industrial and commercial settings. Unlike hydrogen sulfide or carbon monoxide, CO2 doesn’t trigger an obvious acute physiological response at moderate concentrations — it displaces oxygen gradually, impairing judgement and physical capacity before a worker realises the atmosphere has become unsafe. In cold storage facilities, breweries, fermentation plants, greenhouses, and confined spaces adjacent to CO2-generating processes, CO2 monitoring is not an optional refinement to a gas detection programme — it is a core safety requirement that many basic multi-gas monitors simply don’t cover.
The K-600M CO2 Gas Detector fills that gap directly. It is a 5-in-1 portable multi-gas detector with a built-in pump, configured to monitor CO2 simultaneously alongside CO, CH4 (LEL), H2S, and O2 — the full combination of gases that create the most common overlapping hazard profiles in CO2-risk environments. It is available in two sensor configurations: an IR sensor variant for CO2 and CH4 detection, and a catalytic sensor variant for CH4 detection — allowing the instrument to be matched to the specific detection requirements and operating conditions of the deployment environment.
Built on the K-600M platform — a fully specified multi-gas instrument with a built-in pump capable of drawing samples up to 20 metres, 4G network connectivity, TWA/STEL alarm support, TF card data storage, and USB-C PC transfer — the CO2 variant brings the same operational capability to CO2 monitoring applications that the standard K-600M delivers for O2/CO/H2S/LEL environments. What differentiates this configuration in the CO2 detector category is the built-in pump with 20-metre sampling range: for pre-entry confined space testing in cold rooms, breweries, and enclosed CO2-risk environments, pump sampling from outside the space is the safe approach — and very few portable CO2 detectors in this class provide it.
Key Features
5-in-1 Gas Detection — CO2, CO, CH4, H2S, O2 Simultaneously
The K-600M CO2 variant monitors five gases simultaneously: carbon dioxide (0–5% VOL), carbon monoxide (0–1000 PPM), methane/LEL (0–100% LEL), hydrogen sulfide (0–100 PPM), and oxygen (0–30% VOL). In CO2-risk environments — cold storage facilities, breweries, wine cellars, fermentation plants — these five gases represent the complete atmospheric hazard profile. CO2 displaces oxygen; H2S may be present from biological processes; CH4 may be present from anaerobic fermentation; CO from associated heating or refrigeration equipment. A single instrument covering all five eliminates the need for multiple devices and ensures no hazard channel goes unmonitored.
Two Sensor Options — IR Sensor or Catalytic Sensor for CH4
The K-600M CO2 is available in two configurations. The IR sensor variant uses infrared technology for both CO2 (0–5% VOL) and CH4/LEL (0–100% LEL) detection. The catalytic sensor variant uses infrared for CO2 and catalytic bead technology for CH4/LEL detection. IR sensors for CO2 offer superior stability, longer lifespan, and resistance to poisoning compared to electrochemical alternatives — particularly important in CO2-heavy atmospheres where the sensor is continuously exposed to the target gas. The catalytic CH4 sensor variant suits applications where catalyst poisoning is not a significant concern and lower equipment cost is a priority. Selecting the right sensor configuration for the specific deployment environment is a decision worth discussing with a specialist — contact Alright Engineering Solutions for guidance.
Built-In Pump — 20m Sampling Distance
The built-in pump draws samples through a hose up to 20 metres in length with 6-level adjustable flow control and pump fault alarm. For CO2 pre-entry testing — cold rooms, brewing tanks, fermentation vessels, underground CO2 storage — pump sampling from outside the space allows the atmosphere to be assessed before anyone enters. CO2 is heavier than air and accumulates at low points inside enclosed spaces; pump sampling that reaches the lowest point of the space provides a more accurate pre-entry assessment than surface-level diffusion testing at the entry point.
4G Network Connectivity — Real-Time Remote Monitoring
The K-600M CO2 supports 4G communication for real-time data transmission to a remote monitoring platform. For food and beverage facilities, cold storage operations, and lone worker programmes where workers may enter CO2-risk enclosed spaces alone, 4G connectivity allows a safety supervisor to monitor gas readings and worker status in real time from outside the space. Multiple instruments can be networked for site-wide monitoring visibility across a multi-zone facility.
TWA/STEL Alarm Support — Occupational Exposure Monitoring
TWA and STEL alarm capability tracks cumulative and short-term exposure against occupational health limits for CO, H2S, and other toxic channels. For food processing, brewing, and cold storage operations where workers may be exposed to elevated CO2 concentrations across repeated entries over a working day, TWA monitoring provides cumulative exposure data that instantaneous peak alarms alone cannot capture.
TF Card and USB-C Data Export
External TF memory card storage captures atmospheric monitoring data and alarm events throughout the shift independently of PC connection. USB-C connectivity allows direct data transfer to a PC for report generation, compliance records, and confined space entry permit documentation. For food safety and HACCP-regulated environments where atmospheric monitoring records may form part of a broader food safety management system audit trail, documented gas monitoring data has compliance value beyond standard safety record-keeping.
Adjustable 6-Level Pump Flow Control — Optimised for Distance and Application
Pump flow rate can be adjusted across 6 levels to optimise sampling performance for the hose length and application — faster flow for shorter hoses and rapid pre-entry assessment, lower flow for longer hoses where flow velocity needs to be balanced against draw distance. This adjustability ensures accurate atmospheric sampling across the range of confined space geometries and hose lengths encountered in practical CO2 monitoring applications.
Technical Specifications
Model: K-600M (CO2 Configuration)
Gas Detection: 5-in-1 — CO2, CO, CH4 (LEL), H2S, O2
CO2 Range: 0–5% VOL (IR sensor)
CH4/LEL Range: 0–100% LEL (IR sensor or Catalytic sensor — two variants available)
CO Range: 0–1000 PPM
H2S Range: 0–100 PPM
O2 Range: 0–30% VOL
Sampling Method: Built-in pump (6-level flow control) and natural diffusion
Pumping Distance: ≥ 20m (with hose)
Battery: 4000mAh lithium battery
Working Time: ≥ 8 hours
Charging Time: < 6 hours
Sensor Life: 2 years (subject to usage environment)
Alarm Types: Sound, Light, Vibration, Display — TWA/STEL alarm, Pump fault alarm
Response Time: T30 < 30 seconds
Wireless: 4G communication
Data Storage: External TF memory card
Interface: USB Type-C
Working Temperature: -10°C to 55°C
Humidity Range: 1%–100% RH
Benefits
CO2 pre-entry testing from outside the enclosed space — at 20 metres. CO2 is heavier than air and accumulates at low points inside tanks, vessels, cold rooms, and underground spaces. The K-600M CO2’s 20-metre pump sampling allows the atmosphere at the lowest point of the space to be assessed before any worker enters — from a safe position outside. This is the correct safe practice for CO2 confined space pre-entry, and it requires pump sampling capability that most basic CO2 monitors do not provide.
IR sensor option for superior CO2 detection stability in CO2-rich environments. In cold storage facilities, brewing tanks, and CO2 storage areas where the sensor may be continuously exposed to elevated CO2 concentrations, IR sensor technology maintains detection accuracy and lifespan more reliably than electrochemical alternatives. For operators who have experienced premature sensor degradation in high-CO2 environments with conventional detectors, the IR sensor variant directly addresses that failure mode.
Five gas channels cover the full hazard profile of CO2-risk environments. CO2 displacement of oxygen, associated combustible gas from fermentation or process sources, CO from heating and refrigeration equipment, and H2S from biological processes — all five channels in a single instrument means no hazard category goes undetected during confined space entry or routine atmospheric monitoring in CO2-risk facilities.
4G remote monitoring for lone worker and CO2 confined space safety. CO2-induced incapacitation can occur rapidly and without warning at high concentrations. Real-time 4G monitoring of gas readings and worker status from outside the space provides a safety supervisor with early warning of deteriorating atmospheric conditions — before a worker becomes unable to self-rescue or trigger a manual alarm.
Documented atmospheric monitoring data for food safety and compliance programmes. TF card data storage and USB-C PC transfer provide a complete record of every confined space entry atmosphere assessment — useful not just for safety compliance but for HACCP-regulated food facilities where atmospheric monitoring records may be reviewed as part of food safety audits.
Who It’s For
The Safety Manager at a Brewery, Winery, or Fermentation Facility
Your facility uses CO2-generating fermentation processes across multiple enclosed vessels, cellars, and storage tanks. Workers regularly enter these spaces for cleaning, maintenance, and sampling — and CO2 accumulation is a daily risk. You need an instrument that provides CO2 monitoring at a range relevant to the actual hazard levels in your fermentation spaces, covers the other gas hazards present in the environment, and can be used for pre-entry pump testing before each entry. The K-600M CO2’s 5-in-1 configuration, IR CO2 sensor, and 20-metre pump capability cover all three requirements in a single instrument.
The Cold Storage and Logistics Facility Manager
Your cold store uses CO2 refrigerant or dry ice in enclosed rooms where workers enter for stock management, maintenance, and inspection. CO2 build-up in these environments is a well-documented cause of worker incapacitation. You need CO2 monitoring with pump sampling capability for pre-entry checks, O2 monitoring for deficiency detection, and 4G connectivity for supervisor oversight of workers entering cold rooms alone. The K-600M CO2 addresses each of those requirements directly.
The HSE Officer at a Food Processing or Beverages Manufacturing Facility
Your facility has CO2-risk confined spaces — fermentation tanks, carbonation vessels, cold rooms, CO2 storage — that require formal confined space entry procedures with documented atmosphere assessments. You need an instrument that generates a complete atmospheric monitoring record for each entry — across all relevant gas channels — that can be attached to the confined space entry permit as evidence of pre-entry assessment. The K-600M CO2’s TF card data storage and USB-C PC transfer provide exactly that documentation capability.
Possible Applications
- Brewery and fermentation tank entry — CO2, O2, and multi-gas pre-entry assessment and continuous monitoring during cleaning, maintenance, and inspection of fermentation vessels
- Cold storage and refrigerated warehouse entry — CO2 and O2 monitoring in enclosed refrigerated spaces using CO2 refrigerant or dry ice
- Wine cellar and beverage storage inspection — CO2 accumulation monitoring in enclosed underground or enclosed storage areas with active fermentation
- Food processing confined space entry — Multi-gas pre-entry assessment for CO2-generating process vessels, hoppers, and storage silos in food manufacturing
- CO2 fire suppression system areas — Post-discharge atmosphere assessment in server rooms, electrical switchrooms, and enclosed spaces protected by CO2 suppression systems
- Biogas and anaerobic digestion facilities — CO2, CH4, H2S, and O2 monitoring in enclosed digester and biogas handling areas
- Greenhouse and controlled atmosphere storage — CO2 monitoring in CO2-enriched growing environments and controlled atmosphere fruit storage facilities
- Underground CO2 storage and distribution — Confined space atmosphere assessment in CO2 storage vessels, tanker unloading areas, and underground distribution infrastructure
Trust and Certifications
IR Sensor Technology — Verified CO2 Detection Stability
Infrared sensor technology for CO2 detection provides superior long-term stability compared to electrochemical alternatives — particularly in environments where the sensor is regularly or continuously exposed to elevated CO2 concentrations. IR sensors are not depleted by exposure to the target gas, have longer operational lifespans in CO2-rich atmospheres, and maintain calibration accuracy more reliably across extended deployment periods. For CO2 monitoring applications where sensor reliability in CO2-heavy environments is a specific concern, the IR sensor variant directly addresses that requirement.
Pump Fault Alarm — Detection System Integrity
The pump fault alarm alerts the user when the pump is blocked or malfunctioning during sampling. In CO2 pre-entry testing, an undetected pump fault — producing no sample flow while the display reads “clear” — creates false confidence that the atmosphere is safe when it may not have been tested at all. Pump fault detection is a safety feature specific to CO2 confined space entry scenarios where the consequence of a missed alarm is incapacitation without warning.
TWA/STEL Compliance — Occupational Exposure Standards
TWA and STEL alarm capability aligns the K-600M CO2 with occupational exposure limit frameworks for CO, H2S, and associated toxic gas channels. For food and beverage employers with formal occupational health monitoring obligations, this capability supports compliance with regulatory exposure limit requirements.
2-Year Sensor Life
A 2-year sensor life specification (subject to usage environment) for each gas channel allows maintenance planning as a scheduled activity. For food and beverage facilities with formal equipment maintenance programmes, a defined sensor replacement cycle supports auditable maintenance record-keeping.
Authorised by Alright Engineering Solutions
The K-600M CO2 is supplied through Alright Engineering Solutions Pte. Ltd., an authorised distributor of personal and portable gas detection equipment in Singapore. Alright Engineering Solutions provides local procurement support, sensor configuration guidance (IR vs catalytic), and technical assistance for the Singapore and regional market.
Accessories and Variants
Sensor Configuration Options
IR Sensor Variant — CO2 (IR, 0–5% VOL) + CH4 (IR, 0–100% LEL) + CO + H2S + O2. Recommended for CO2-heavy environments where IR sensor stability and longevity are priorities.
Catalytic Sensor Variant — CO2 (IR, 0–5% VOL) + CH4 (Catalytic, 0–100% LEL) + CO + H2S + O2. Suitable for environments where catalyst poisoning is not a concern and equipment cost is a priority factor.
Sampling Hose (up to 20m)
Extends the pump’s reach for pre-entry CO2 testing in deep tanks, enclosed cold rooms, and underground confined spaces. Essential for reaching the lowest points of spaces where CO2 (heavier than air) accumulates.
External TF Memory Card
On-instrument data storage for atmospheric monitoring records across an entire shift or inspection programme — independent of PC connection.
USB-C Data Cable
For direct PC connection and compliance record export — atmospheric monitoring data, alarm events, and TWA records transferred from instrument to documentation system.
Related Products from Alright Engineering Solutions
K-600M Standard Configuration — O2, CO, H2S, LEL multi-gas detector with built-in pump and 4G for non-CO2 industrial applications
S40 Portable Multi Gas Detector — Alternative connected multi-gas detector with pump, 4G, and fall alarm
BELL LITE Multi Gas Detector — Personal wearable 4-gas monitor with ATEX certification and BELLCONNECT app
BH-H5 Household Gas Alarm — Fixed CH4 gas alarm with relay solenoid valve output for permanent installation
Get in Touch
If CO2 monitoring is part of your confined space entry programme, cold storage safety system, or food and beverage facility gas safety requirement — the K-600M CO2 with built-in pump is worth a detailed evaluation, particularly if you need to assess atmospheric conditions at depth before worker entry.
Contact Alright Engineering Solutions to request a formal quote, discuss IR vs catalytic sensor configuration for your specific environment, or arrange a product demonstration for your safety team.
📍 3791 Jalan Bukit Merah #06-01, E-Centre @ Redhill, Singapore 159471
